A mirrored hidden door is a clever trick. From the room, it looks like a full-length mirror on the wall. Push it, and it opens into an en suite, a walk-in wardrobe, a utility cupboard or a home office. It’s a popular way to hide a doorway in a bedroom or hallway, and it adds light and a sense of space at the same time.
Getting it right takes a bit more thought than a painted concealed door, though. Glass is heavy, mirrors on doors have safety rules, and the mirror has to clear the frame every time the door opens. This guide covers what to plan, from the type of mirror to hinges, latches and fitting.
Where mirrored hidden doors work best
Mirrored doors look most convincing where a full-length mirror would make sense anyway:
- Bedrooms, hiding an en suite or dressing room. Our guide to a hidden en suite door covers moisture and ventilation for that layout.
- Hallways, hiding a cloaks cupboard or utility space, where a mirror by the front door is genuinely useful.
- Dressing areas, where a mirror is part of the room’s purpose.
- Small rooms, where the reflection makes the space feel bigger.
For more ways to disguise a doorway, see our hidden door ideas.
The basic set-up
Most mirrored hidden doors are a flush concealed door with a mirror fixed to the room-side face. The door sits in a concealed frame, flush with the wall, with hidden hinges and no architrave. The frame is designed to be plastered in, so the only thing you see is the mirror and a slim shadow gap around the door. Our guide to concealed door frame details explains how these frames work.
You can treat the mirror in two ways:
- Mirror covering the whole door. The cleanest look, with the door reading as one big mirror panel.
- Mirror set within the door face. A slightly smaller mirror, with the painted door showing as a border. This is more forgiving of tolerances and makes it easier to keep the mirror clear of the frame.
Safety first: use safety-backed mirror
Glass in doors can cause serious injuries if it breaks. Approved Document K, which covers protection from impact with glazing in England, sets out “critical locations” where glazing needs to break safely, be robust, be in small panes, or be protected. Glazing in doors, between floor level and 1500mm, is one of those critical locations.
The British Standard for glazing in buildings, BS 6262-4, specifically includes mirrored doors and panels as critical locations. It sets out the minimum impact classification for mirror glazing in doors under BS EN 12600, the impact test standard for flat glass. For fully backed mirror glazing, it recommends class 3(B)3 where the smaller dimension of the pane is 900mm or less, and class 2(B)2 where it is over 900mm.
In practice, that means using a safety-backed mirror: a mirror with a film bonded across the back, tested and classified to BS EN 12600, so that if the glass breaks, the pieces stay stuck to the film instead of falling. Ask your glazier or supplier for the classification in writing. This matters even more in a home with children, or where the door is in a busy hallway.
Different rules apply in Scotland, Wales and Northern Ireland, so if you’re outside England, check your local guidance.
Weight: the part people forget
A mirror adds a lot of weight to a door. Float glass weighs about 2.5kg per square metre for every millimetre of thickness. So a 4mm mirror covering 2m x 0.8m (1.6 square metres) adds roughly 16kg, and a 6mm mirror of the same size adds about 24kg, on top of the weight of the door and the adhesive.
That extra weight affects everything else:
- Hinges. Concealed hinges have maximum door weight ratings, and the number of hinges matters. Add up the door, mirror and fixings, and choose hinges rated comfortably above the total. Our concealed door hinges guide explains the options.
- The door blank. Use a solid, stable door that won’t bow under a heavy face. A lightweight hollow core door isn’t a good base for a large mirror.
- The frame and wall. The frame has to be fixed securely to sound structure, because it now carries a heavier door.
- Opening and closing. A heavier door has more momentum. A door stop, or a closer or damper suited to concealed doors, can stop it swinging into a wall. See our concealed door closers guide.
If in doubt, check the weight limits with the door and hardware manufacturer before ordering the mirror.
Clearances: stop the mirror catching the frame
Concealed doors are made to tight tolerances, and the door edge moves through an arc as it opens. A mirror stuck on the face changes the door’s thickness and edge profile, so you need to plan for it:
- Keep the mirror back from the edges. Leaving a margin around the mirror helps the door open without the glass catching the frame or plaster. Agree the margin with your door supplier.
- Think about the hinge side. On the hinge side, the face of the door moves towards the frame as it opens. Test with the door before the mirror is cut.
- Polish the edges. Ask for polished or bevelled edges, so there are no sharp edges exposed.
- Measure after the door is hung. Measure the mirror size from the hung, adjusted door, not from drawings.
Our guide to how to measure for a concealed door covers sizing for the door itself.
Push or pull side?
On a concealed door, the mirror normally goes on the flush face, which is the side where the door sits level with the wall. Whether that face is the push side or the pull side depends on your door and frame.
- Push side (opens away from you). The most common choice. You push the mirror to open the door, so you need a way to stop fingerprints and a latch that releases with a push.
- Pull side (opens towards you). Needs some kind of grip. A small, discreet pull or a finger groove in the door edge works better than a big handle that spoils the mirror effect.
Our guide to concealed door handles compares the options.
Latches and handles
Handles on mirrors look odd, so most people go handleless:
- Push-to-open latches let you press the door to release it. They’re tidy, but you’ll be touching the mirror, so expect to clean it.
- Magnetic latches hold the door closed quietly without a visible catch. Our guide to magnetic latches for concealed doors explains how they work and where they suit best.
- Flush pulls on the pull side or door edge give something to grip without breaking up the mirror.
If the door leads to a bathroom, you’ll also want a privacy lock. Choose one designed for concealed doors, so the turn is discreet on the inside. Browse our concealed door accessories for compatible hardware.
Fixing the mirror
Mirror fixing is a job for a glazier or experienced installer. A few points to ask about:
- Mirror adhesive. Use an adhesive designed for mirrors. Some ordinary adhesives can attack the silver backing and cause dark marks.
- Mechanical support. Depending on size and weight, your installer may use clips or a support channel as well as adhesive.
- A flat, sound surface. Any bump in the door face will show up as a distortion in the reflection.
- Doors that are already finished. Make sure the door’s finish is compatible with the adhesive.
Fire doors: check before adding a mirror
If the hidden door has to be a fire door, don’t add a mirror without checking first. A fire door is tested and certified as a complete assembly, and changing it, including adding a heavy face, could affect that certification. Ask the door manufacturer whether a mirror is allowed under its certification. Our guide to FD30 concealed doors explains how fire-rated concealed doors work.
FAQs
Is a mirrored hidden door safe?
It can be, if you use a safety-backed mirror classified to BS EN 12600 and suitable hinges. BS 6262-4 treats mirrored doors as critical locations, so ordinary unbacked mirror isn’t the right choice.
How heavy is a mirrored door?
Float glass weighs about 2.5kg per square metre for each millimetre of thickness, so a 4mm mirror on a typical door adds about 16kg. Add the weight of the door and fixings, and check your hinges are rated for the total.
Can I add a mirror to an existing concealed door?
Possibly, but check the door’s construction, the hinge weight rating and the clearances first. If it’s a fire door, ask the manufacturer before making any changes.
Which side of a concealed door should the mirror go on?
Usually the flush face, the side that sits level with the wall. That can be the push or pull side depending on your frame, and it affects your choice of latch and handle.
How do I open a mirrored hidden door without a handle?
Most people use a push-to-open or magnetic latch on the push side, or a discreet flush pull on the pull side.
Plan your mirrored hidden door
Explore our concealed doors and made-to-measure concealed doors to find a frame and door that suit your opening. If you’d like advice on hinges, latches or sizes for a mirrored finish, get in touch with our team.
