Shopping Cart

Pocket Doors in a New Build or Self-Build: How to Plan Them In

A new build is the easiest place to fit a pocket door. There’s no wall to knock out, no plaster to patch and no old services to reroute. The catch is timing. A pocket door kit becomes part of the wall, so the decisions have to be made while the house is still on paper, not when the plasterer arrives.

This guide is for self-builders, people working with an architect or package company, and anyone buying off-plan who can still request changes. It covers what to decide early, what to tell your designer and trades, and when the kit should go in.

Why the planning stage matters

A pocket door slides into a steel or timber cassette built into a stud partition. That cassette needs a clear stretch of wall roughly the width of the door on one side of the opening (or both sides, for a double). Nothing else can go in that part of the wall: no pipes, no cables, no sockets and no fixings for heavy shelves.

On an existing house you work around what’s already there. On a new build you can design the walls around the doors. If you leave the decision late, you may find a radiator, a switch or a soil pipe has already been drawn exactly where the pocket needs to go.

What to decide before the drawings are final

Which doors should be pocket doors

Pocket doors make most sense where a hinged door would clash with something: a tight hallway, an en suite where the door would hit the basin, a utility room, a walk-in wardrobe, or between a kitchen and living space that you want open most of the time. Walk through the plan room by room and mark where a door swing wastes space or gets in the way.

It’s also worth thinking about which doors you’ll keep closed. A pocket door is usually a little less effective at stopping sound than a well-sealed hinged door, so for a bedroom next to a noisy space you might choose a hinged or concealed door instead. Our pocket door soundproofing guide explains the trade-off.

Wall thickness

A pocket wall is built around the cassette, so its finished thickness depends on the kit and the boarding. Many internal stud walls are designed thinner than a pocket kit needs, so ask your designer to draw the pocket walls at the right thickness from the start. Our pocket door wall thickness guide explains how to work it out, and the pocket door sizes guide covers standard door sizes.

Single, double or telescopic

If you want a wide opening between two rooms, decide now whether that will be a single or double pocket door. A double needs a pocket on each side of the opening, so both stretches of wall must stay clear.

Door height

Taller doors can look striking in a new build with generous ceiling heights. If you want a floor-to-ceiling look, choose the kit and door height together, because the kit’s head track and the door leaf have to match. See our floor-to-ceiling doors guide for the options.

Tell every trade where the pockets are

Most problems with pocket doors in new builds come from someone not knowing the pocket is there. Mark each pocket clearly on the drawings, and make sure these people see them:

  • Electrician: no cables, sockets or switches in the pocket section. Move light switches to the opposite side of the opening or to the next wall.
  • Plumber and heating engineer: no pipes through the pocket, and no radiators hung on it.
  • Ventilation installer: no ducts through the pocket section. If you have mechanical ventilation, check the air paths between rooms still work with the doors closed (more on this below).
  • Kitchen and bathroom fitters: no wall units, towel rails or mirrors fixed over the pocket.
  • Drylining team: use the screw length and fixing pattern the kit maker specifies, so screws can’t reach the door.

A simple trick is to tape or spray-mark the pocket area on the floor slab and studs during first fix, so it’s obvious on site.

Fire safety and building regulations

New builds go through building control, so check the plans with your designer or building control body before you commit to pocket doors on any route that needs fire protection. In some layouts, such as three-storey houses with a protected stairway, the doors onto that stair may need to be fire doors. A standard pocket door kit isn’t a fire door. There are fire-rated pocket systems, but they must be supplied and installed as a tested set. Our guides to FD30 door requirements and FD30 pocket doors go into detail.

Ventilation is another point. Approved Document F (2021 edition, for England) says internal doors should allow air to move between rooms, giving a free area equal to a 10mm undercut on a 760mm wide door. Pocket doors normally have a running gap at the bottom, but if you plan seals or tight floor guides, make sure the house can still ventilate as designed.

For sound, Approved Document E sets minimum sound insulation for new internal walls between a bedroom or a room with a WC and other rooms. That requirement doesn’t apply to an internal wall that contains a door, but the rest of the wall around the pocket still matters if you want a quiet home.

Floors and thresholds

Decide on floor finishes early, because they set the door height and the gap under the door. Underfloor heating screed, engineered timber, tiles and carpet all have different build-ups. The finished floor should run level through the opening, and the floor guide needs to be fixed at the right height. Our pocket door flooring guide covers this in more depth.

When to fit the kit

On most builds the sequence looks like this:

  1. First fix carpentry: the pocket kit goes in as the stud partitions are built. Make sure the opening is plumb and square, and the head is level.
  2. Services first fix: electricians and plumbers run their routes, keeping clear of the marked pockets.
  3. Boarding and plastering: the pocket is boarded with the correct fixings. Protect the track and cassette from plaster, dust and debris.
  4. Second fix: the door leaf is hung, adjusted and fitted with handles, stops and any soft-close parts once the messy trades have finished.

Hanging the door last keeps it safe from damage and lets you check it runs smoothly in the finished opening. Our pocket door installation guide walks through the steps, and our guide to choosing a door for a pocket door kit covers leaf thickness and weight.

Timber frame and package homes

Many self-builds and new estates use timber frame. Pocket kits suit stud walls well, but some timber frame walls are load-bearing or provide racking resistance, and that changes where a pocket can go. Our article on pocket doors in timber frame houses explains what to check with your frame supplier or engineer.

If you’re working with a package company, ask early whether they can build pocket walls into their panels, or whether the pocket partitions will be built on site.

Buying off-plan?

If you’re buying a new home from a developer, ask whether pocket doors are offered as an upgrade or whether they’ll consider a change before the internal walls go up. Once the plasterboard is on, adding one becomes a retrofit job. Get any agreed changes confirmed in writing.

Order with enough lead time

Order kits in time for first fix, not second fix. The door leaves can follow later, but having them chosen early means the kit and the door are definitely compatible. If you need unusual sizes, our made-to-measure pocket doors guide explains how bespoke sizing works. You can browse pocket door kits and pocket door hardware to plan your specification.

Frequently asked questions

When should a pocket door kit be installed in a new build?

During first fix carpentry, when the stud partitions are being built and before services and plasterboard go in. The door leaf itself is usually hung at second fix.

Do pocket doors need building regulations approval in a new build?

The whole house goes through building control. Pocket doors themselves are usually straightforward, but any door that needs to be a fire door must be a tested fire-rated set, and ventilation and sound rules still apply. Check the plans with your building control body.

Can I put a light switch next to a pocket door?

Yes, but not on the pocket side. Put it on the other side of the opening or on another wall, and make sure the electrician knows exactly where the pocket is.

Are pocket doors more expensive in a new build?

A kit costs more than a basic door lining, but fitting one into a new wall is much simpler than retrofitting into an existing wall. Get prices for your specific design from your builder.

Can I add a pocket door after the house is finished?

Yes, but it means opening up and rebuilding the wall, moving any services in the way and redecorating. Planning it in from the start is far easier.

Planning a new build?

If you’re working out which pocket doors to specify, get in touch with our team and we’ll help you choose the right kits and doors for your plans.

Leave a Reply

Your email address will not be published. Required fields are marked *


Powered by Startup Fast